Assembling of the stand, Assembly – Panasonic TYST65PF1 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly
1. Assembling of the stand
1. Insert one support column © to the
base ® and fix it with the support column
assembly screws
®
(4). Assemble
the other support column in the same
procedure.
(Tightening torque: 1.8 to 2.2 N-m)
Support column
assembly screw
®
w
"5)
c
LU
2. Lay down the assembled support column
as shown in the figure, and to its back
side, fix the fittings (top/bottom) © with
the fitting attachment screws © (4) and
the insert nuts © (4).
(Tightening torque: 1.8 to 2.2 N-m)
Fitting (top) ©
Insert nut ©
Fitting (bottom) ©
Fitting attachment screw ©
3. Raise the support column and fix the
other support column © to the other side
of the fittings with the fitting attachment
screws © (4) and insert nuts © (4).
(Tightening torque: 1.8 to 2.2 N-m)
25