Wiring, Preventing falling over – Panasonic TYST65PF1 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Wiring
Insert the clampers ® (4) to
the side of the lower part of the
mounting brackets (right/left).
Wire the cables by inserting
them into the wiring guides on
the back of the right and left
support columns. Then attach
the stoppers ® (6) to the wiring
guides with the stopper attachment
screws © (6).
Each of the right and left wiring
guides has 6 screw holes for the
stopperattachment screws. Use
the screw holes appropriate for
yourwiring.
(Tightening torque: 1.2 to 1.5 N-m)
Do not bundle the connection cables
and main lead together.
w
"5)
c
LU
»Stopper
attachment
screw ©
Stopper ©
5. Preventing falling over
In order to prevent the unit from falling over, fix it
by passing strong cords orwires to the crossover
points (1 each on the right and left) of the mounting
brackets and the fitting (top), and connect them
without slack to sturdy pillars or walls.
(Use commercially available cord orwire to prevent
falling over.)
The distance between the pillar orwall and the rear
ofthe display must be1m (39.4 inches) or less.
29