Night Optics Panther 336 Thermal Riflescope (336x256 | 50mm) - Manual (Page 8)

ATTENTION!
• Buttons operate in 2 ways: “Momentary Press (Press/release)” & “Press/Hold (Press/hold for several seconds).”
• Do not press device buttons with objects. This could damage of the rubber coating as well as the button mechanisms.
• When depressed properly the buttons will give a tactile feedback which feels like a click.
OPERATION
7
BUTTON LAYOUT
[1] Menu / OK (Accept Selection) / Polarity
[2] Menu Navigation (Up) / Display Brightness (Increase)
[3] Menu Navigation (Down) / Display Brightness (Decrease)
[4] Digital Zoom / Back / Exit
[5] Power On/Off / Manual Shutter
SYSTEM CONTROLS Figure 6
1
2
3
4
5
FIGURE 6: Buttons
Menu System / Select / Polarity (fig. 6.1): To enter the menu press and
hold (fig 6-1) for 3 seconds. To navigate through the menu screen use
(fig. 6-2 - UP) and (fig. 6-3 - Down). Make selections by momentarily
pressing (fig. 6-1). To navigate to previous menu screens or to exit the
menu momentarily press (fig. 6-4) until the menu screen disappears
from the display. Adjust polarity by momentarily pressing (fig. 6-1).
Display Brightness / Navigation (fig. 6-2, 3): Increase display brightness by
pressing (fig. 6-2) repeatedly. Decrease display brightness by pressing
(fig. 6-3) repeatedly until the desired setting is reached. There are 30
levels of display brightness
Digital Zoom / Back / Exit (fig. 6.4): Adjust digital zoom by pressing (fig. 6-4) momentarily. This button
also manages menu navigation functions and exit from the menu screen. See “Menu System /
Select” for information on this function.
Power / Shutter (fig. 6-5): Press and hold (fig. 6-5) for 3 seconds to power on, press and hold for 2
seconds to power down. See “Powering on/off” on page 5 for more detail on this procedure.
Manual shutter calibration can be done by pressing (fig. 6-5) momentarily. An audible click sound
from the shutter will be heard.