Petsafe Big Dog Remote Trainer - Manual (Page 4)

6 US Customer Care Center 1-800-732-2677 www.petsafe.net 7
How the System Works
Now you can experience the difference a Remote Trainer can make. Spend less time training and more time
enjoying your dog. The PetSafe ® Remote Trainer is easy to use with an advanced digital display that tells you
exactly what level of stimulation you are using.
The Remote Trainer assists you in controlling your pet without a leash in a range of up to 100 yards. At the
push of a button, your remote sends a signal activating your dog’s Receiver Collar. He receives a safe but
annoying stimulation. He’ll quickly learn the association between his behavior and your correction; in no
time, you’ll have a better-behaved pet. The PetSafe ® Remote Trainers have been proven safe, comfortable,
and effective for both small and large dog breeds.
Using the Remote Trainer consistently and correctly, any basic obedience commands
can be taught and many misbehaviors that your pet exhibits can be corrected.
Important: The Remote Trainer has a range up to 100 yards. Hold the Remote
Transmitter in a horizontal position away from your body to achieve optimum range.
Terrain, weather, vegetation, transmission from other radio devices, and other
factors will affect the maximum range.
Features
• Range up to 100 yards
• 16 levels of stimulation (8 low levels and 8 high levels) and a “+2 Boost” button that instantly increases
the current Stimulation Level by 2 when pressed (will not exceed the 8 High Stimulation Level)
• Tone only button
• Easy to read Digital Display on Transmitter displays current Stimulation Level and battery status
• Waterproof Receiver Collar
Key Definitions
Remote Transmitter: Transmits
the signal to the Receiver Collar.
Tone Only Button (Green):
Sends an audible tone to the
collar. No stimulation is delivered.
Stimulation Only Button
(Yellow): Delivers stimulation
through the Contact Points
on the Receiver Collar at the
level shown on the Digital
Display. When held down for
12 consecutive seconds, the
Transmitter will “time-out”, and
you must release and press the
button again before additional
stimulation can be delivered.
+2 Boost Button (Red): When pressed, instantly adds a boost of 2 levels above current Stimulation
Level. Can not exceed the 8 High Stimulation Level.
Stim Down Button (-): Decreases Stimulation Level by 1.
Stim Up Button (+): Increases Stimulation Level by 1.
Digital Display: Indicates Stimulation Level, pairing mode and battery status. See Prepare the Remote
Transmitter section for more details.
Transmitter LED Indicator Light: 3 colors indicate which function the Transmitter is currently performing.
Green LED: Indicates tone is being transmitted.
Red LED: Indicates stimulation is being transmitted. Also indicates low battery.
Orange LED: Indicates pairing command is being transmitted.
LED Indicator
Light
Tone Button
(green)
Digital Display
Stimulation
Button (yellow)
Stim Up
Button
+2 Boost
Button
Stim Down
Button
Belt Clip
Battery
Cover
Wrist
Strap
Loop