Petsafe Elite Pendant™ Remote Trainer - Manual (Page 22)

22 Customer Care Center 1-800-732-2677
Exploring myTrainer
™
Software
myTrainer ™ software is comprised of four tab pages and a Summary section. When at least one
device is plugged into the USB port, the Summary section is always visible; while the tab pages can
be changed by left clicking the mouse on the tab that interests you ( Fig 2). When no devices are
plugged into the USB ports, you will be limited to the Help tab, despite any tab you may click on.
Fig. 2
Control Box
Device Image Buttons
Training System Summary
Tabs
Control Box: In the upper right hand corner of the myTrainer ™ screen is the control box. Inside the
control box are minimize, maximize, and close buttons. The minimize button sends the myTrainer ™
window to the Task bar, generally located at the bottom of the screen on Windows operating
systems. The maximize button expands the myTrainer ™ window to take up the whole viewing area
of the screen. However, the Summary area and tab pages will not expand when the maximize
button is pressed.
Device Image Buttons: Device image buttons allow you to select between the Pendant
™ and
the Handheld Remote when both are plugged into USB ports simultaneously. The buttons are
outlined in green when connected to the USB port and by red when not connected. Device
image buttons that are outlined in red will ignore mouse clicks. When only one device is
plugged in, it is automatically selected and its information displayed. Only the currently selected
device’s information will be displayed in the Training System Summary section.
Training System Summary: The Summary section contains the following device information:
– Product Name
– Model Number
– Serial Number
– Handheld Remote (Transmitter) Identification
– Software Revision
– Stimulation Profile Type
– Estimated Battery Capacity
This information can be copied to the clipboard by using the right click context menu option
and pasted into an email when consulting Customer Care.
The battery symbol displays the estimated battery capacity. When the capacity is above 20%
the battery is green. When the capacity is between 10% and 20% it will be yellow. When the
capacity is below 10% it will be red.