Petsafe Elite Pendant™ Remote Trainer - Manual (Page 23)

www.petsafe.net 23
Home Tab: The Home tab is shown by default when myTrainer ™ software is first executed.
Updates Tab: The Updates tab shows the image of the currently selected device and includes
an update status message regarding the software revision, a download button to initiate the
update process, and a status bar to monitor the update progress.
When a new software version is available the DOWNLOAD button will be enabled, the update
status message will state “UPDATE IS AVAILABLE. CLICK ON DOWNLOAD TO BEGIN” and the
status bar will display “Ready” ( Fig 3).
Fig. 3
ATTENTION: Once the update process has started the device must be left plugged into the
USB port until the update completes. When the device is unplugged during an update, it will
go into loader recovery mode and you must retry the download so that the device is usable.
To start the update process, click the DOWNLOAD button. The status bar at the bottom will
track the progress. When the process completes, a message will appear confirming the device
has been updated or that the process failed.
When the myTrainer
™ software is up to date, the DOWNLOAD button will be disabled (grayed
out) and the status bar will display “No updates available” ( Fig. 4).
Fig. 4