Litter tray installation – Petsafe ScoopFree Original Self-Cleaning Litter Box User Manual

Page 4

Advertising
background image

Don’t forget to register your ScoopFree

Litter Box at www.scoopfree.com

4

Litter Tray Installation






Step 1:
Place cover of litter tray under
litter tray. The cover is extra protection
against leaks and will be used later for
disposal.

Step 2: Record Today’s Date of litter
tray installation and Tray Change Date
on the waste trap label.

Recommended Disposable Litter

Tray Replacement:

o At least every

20−30 days for 1 cat
10−15 days for 2 cats
7−10 days for 3 cats

Step 3: Grab waste trap lid to lift litter
box until it is standing on its end.

Step 4: Grab litter tray near waste trap
and slide opposite end of tray against
back of litter box. See illustration at
right for orientation.

Step 5: Lower litter box onto litter tray.
You should hear a click, which confirms
the magnets on the waste trap lid have
connected to the magnet contacts on the
litter tray waste trap. Make sure the litter
box is level and sitting on the tray.

Step 6:
Open the litter bag by tearing
corner notch. Empty litter into tray.
Spread litter evenly but do not put litter
under the waste trap. Discard bag.

Step 7: Make sure indicator light is on
steady green. If flashing, level out the
litter so that it is not blocking the optical
sensors.

Your litter box is now ready for use!

Litter Box
Frame

Important Warning: Using tray

longer than recommended

may result in leakage

Advertising
This manual is related to the following products: