Canon GL2 - Manual (Page 125)

125
E
Using a Memor
y Car
d
This section describes how to mark a still image for printing from Card Operation submenu in
CARD PLAY (VCR) mode (including the way to cancel the setting).
– When displaying an index screen, you can mark the still image for printing.
– When playing back a single image, you can erase all print marks.
You can also mark a still image for printing through File Operation menu (
123).
Marking a Still Image for Printing While Viewing an Index Screen
Make sure a memory card that has images recorded on it has been inserted into the camcorder.
1. With a still image in the display, press the INDEX SCREEN button.
• Up to 6 images appear in the display.
• Select the image that you wish to mark for printing (Index Screen
121).
2. Open the menu and select CARD OPER.
3. Select
\ PRINT MARK .
4. Press the SELECT dial in.
• The print mark appears next to the image.
• Press the SELECT dial again to cancel it.
5. Close the menu.
Notes:
• To cancel a print mark, select the print-marked image and press the SELECT dial in. The print
mark disappears.
• If there are a large number of images recorded on the memory card, it may take time for a print
mark to appear on an image.
CARD OPER. PRINT MARKS
( 20)
+ PLAY
(VCR)
CARD
Marking a Still Image for Printing (Print Mark)