Satellite Tufway - Manual (Page 11)

PN 10900/REV P Page 10
10. ATTACH TOILET SEAT
USING A #2 PHILLIPS OR FLAT HEAD SCREWDIVER. (TIGHTEN SEAT HINGE NUT SECURELY)
11. ATTACH ROOF TO FRONT ASSEMBLY
FOR THE FRONT INSTALLATION STEPS; LAY THE UNIT ON ITS REAR PANEL. USING THE C-
CLAMP TOOL, MAKE SURE CAPS AND RIVETS ARE CLAMPED TIGHT UNTIL RUBBER WASHERS
ARE COMPRESSED.
12. ATTACH RIGHT AND LEFT SIDE PANELS TO FRONT ASSEMBLY
USING THE C-CLAMP TOOL, MAKE SURE CAPS AND RIVETS ARE CLAMPED TIGHT.