Satellite Tufway - Manual (Page 13)

PN 10900/REV P Page 12
DIRT BUSTER BASE: INSTALL LAG SCREWS USING A 3/8 NUT DRIVER BIT AND DRILL.
FASTEN SCREWS IN HOLES CLOSEST TO DOOR OPENING. MEASURE 2-1/4 FROM THAT
SCREW AND FASTEN SECOND SCREWS IN NEW LOCATION. SEE PICTURE.
REMOVE SHIPPING SCREW. OPEN DOOR AND INSTALL THE (2) LAG SCREWS TO DIMPLES T0
INSIDE THE FACING FRAME. (TIGHTEN LAG SCREW UNTIL RUBBER WASHER BEGINS TO
FLATTEN - DO NOT OVER TIGHEN).
15
.
INSTALL DOOR LATCH
USING A PHILLIPS SCREWDRIVER INSTALL (4) #10 SCREWS THROUGH LATCH IN DOOR ASSY.