Satellite Mondo - Manual (Page 6)

PN 20340 REV G Page 5
4. PLACE TANK IN UNIT
ATTACH TANK TO PANELS FROM OUTSIDE. IT IS IMPORTANT THAT THE TANK IS SEATED PROPERLY
WHILE ATTACHING THE SIDE PANELS. HAVE ONE PERSON STAND IN TANK WHILE LAGGING PANELS
TO TANK. USING THE DRIVER AND 3/8" NUT DRIVER BIT. TIGHTEN SCREWS UNTIL RUBBER
WASHER BEGINS TO FLATTEN – BE CAREFUL NOT TO OVER TIGHTEN SCREWS.
5. INSTALL URINAL (IF TOILET IS ASSEMBLED WITHOUT URINAL SKIP TO #6)
6. INSTALL VENT PIPE
7. INSTALL PAPERGUARD