Zigen HDBaseT Switches - Manual (Page 13)

Matrix Switcher Series—User Manual
12
- Press the “STO” key firstly.
- Arrange memory location. (Support up to 8 sets of memories, user can select
the memory location through OUT1~OUT8/IN1~IN8.)
- The relations among all settings will be saved in the memory permanently.
 RCL: The “Retriever Key” retrieves all settings that are saved in the memory.
- Press the “RCL” key firstly.
- Then make a random to select one of output/input channel key 1~8.
- The system will retrieve the saved all status and implement current status
switching if the previously saving channel is selected.
 Press and hold STO and RCL keys simultaneously at least 1 sec. to restore to factory
default values.
 HX-44 Memory control only up to 4 sets
 ACTIVE LED: A clear LED indicator designed for reaction by pressing keys on the front
panel and remote controller. Refer to Appendix A Matrix Switcher Remote Controller.
 Only HX-88 / HX-1616.
 IR Receiver: Infrared receiver can receive signals from the Matrix Switcher Remote
Controller.
 LCD: LCD display shows current Matrix Switcher status and operation status.
 Press any keys on the front panel or controller to enable the light of LCD momentarily.
This function cannot be controlled by RS-232 or LAN.