Zigen HDBaseT Switches - Manual (Page 69)

Matrix Switcher Series—User Manual
68
6. After finishing firmware upgrade successfully,
“Firmware Upgrade to Device
Success ” information will appear as below.
Besides, the firmware upgrade will not stop even though the web connection is fail
suddenly. Please check with the LCD screen to confirm the firmware upgrade has
been finished successfully or wait at least 2 minutes then power off to restart your
PC.
7. If there is a firmware already exists on the web server during firmware upgrade. The
“Erase Flash” information window will appear to notice you to remove the existed
firmware before upgrading the new one.