Zigen HDBaseT Switches - Manual (Page 87)

Matrix Switcher Series—User Manual
86
Firmware Upgrade
Before upgrading firmware, you have to receive a Firmware burn package containing all
software needed for burning. Follow the steps as below to upgrade the Extender
(HVX-100-R) firmware:
1. Connect the power cord to the power port on the panel of Extender (HVX-100-R).
The other end of the power cord connected to a suitable power source.
2. Connect the control PC and Extender (HVX-100-R) with a RS-232 cable.
3. On the control PC, decompress the Firmware burn package file.
4. Process the UpdateRX_xxxx.bat file to upgrade Extender (HX-RW) firmware. (xxxx is
specified for firmware version)