Date search, Data code, Date search data code – Canon XHA1S User Manual

Page 110: Co py

Advertising
background image

110

Date Search

You can locate the change of the date/time zone with the date search function.

This function is operated with the wireless controller.

1. Press the SEARCH SELECT button to display the

icon.

2. Press the

or

button to begin searching.

• Press more than once to search for further date changes (up to 10 times).
• Press the STOP

button to stop searching.

 A recording of longer than a minute per date/time zone is required.
 The date search may not function if the data code is not correctly displayed.
 The date search function may not work correctly if you mix recordings in HDV and DV standards

on the same tape.

Data Code

The camcorder maintains a data code containing the recording date and time and other camera data
such as shutter speed, gain and exposure (f-stop).

Selecting the Data Code

Open the menu and select [DISPLAY SETUP/

]. Select [DATA CODE], select a setting

option and close the menu.

Displaying the Data Code

Press the DATA CODE button on the wireless controller.

If you turn off the camcorder, the data code will not appear the next time you turn it on.

Six-Second Auto Date

The date and time appear for 6 seconds when you begin playback, or to indicate that the date or time
zone in the recording has changed.

Open the menu and select [DISPLAY SETUP/

]. Select [6SEC.DATE], set it to [ON] and

close the menu.

MENU

(

27)

DISPLAY SETUP/

DATA CODE••••DATE & TIME

MENU

(

27)

DISPLAY SETUP/

6SEC.DATE••••OFF

CO

PY

Advertising
This manual is related to the following products: