Protecting still images, 123) or, Co py – Canon XHA1S User Manual

Page 123

Advertising
background image

123

Using

a
Mem

o

ry Ca

rd

Protecting Still images

You can protect important still images from accidental erasure when displaying a single image or the
index screen.

If a memory card is initialized, all still images, even protected ones, will be erased permanently.

Protecting a Single Still Image

1. Select the still image you wish to protect.

2. Press the SELECT/SET dial to open the still image operations menu.

In

mode, the menu appears when you press the dial while you are reviewing a still image,

or immediately after recording a still image.

3. Select [

PROTECT].

4. Select [ON].

To remove the protection select [OFF] instead.

5. Select [

CLOSE] to close the menu.

appears and now the image cannot be erased.

Protecting Still Images from the Index Screen

1. Move the zoom lever toward

W.

Up to 6 still images appear.

2. Open the menu and select [CARD OPERATIONS]. Select [

PROTECT] and press

the SELECT/SET dial.

3. Select the image you wish to protect and press the dial.

appears on the image.

• Select additional images with the SELECT/SET dial and protect them in the same way.

4. Close the menu to return to the index screen.

MENU

(

27)

CARD OPERATIONS

PROTECT

CO

PY

Advertising
This manual is related to the following products: