Setting the user bit, Co py – Canon XHA1S User Manual

Page 48

Advertising

Setting the User Bit

The user bit display can be selected from the date or the time of recording, or an identification code
consisting of 8 characters in the hexadecimal system that is useful for labeling tapes. There are sixteen
possible characters: the numbers 0 to 9 and the letters A to F.

If user bit information is being received along with an external time code, you can also record

the external user bit on the tape.

1. Open the menu and select [RECORDING SETUP]. Select [UB SELECT], select a

setting option and press the SELECT/SET dial.

If you selected [00 00 00 00], the user bit set/reset options appear; continue with the procedure below.
Otherwise, close the menu.

If you selected [00 00 00 00]:

2. Select [SET].

The first character of the user bit flashes.

3. Turn the SELECT/SET dial to select a number or letter and press the dial.

The next character of the user bit starts flashing. Set the rest of the user bit in the same way.

4. Close the menu.

To reset the user bit to [00 00 00 00], select [CLEAR] in step 2.
The user bit can be recorded when recording with the camcorder or from analog devices. The user

bit set in the camcorder cannot be recorded when recording from digital devices (HDV or DV).

Displaying the User Bit

Open the menu and select [DISPLAY SETUP/

]. Select [UB DISPLAY], set it to [ON] and

close the menu.

Recording an External User Bit

Open the menu and select [RECORDING SETUP]. Select [UB REC], select [EXT.USR-BIT]
and close the menu.

(

27)

RECORDING SETUP

UB SELECT•••00 00 00 00

(