Vernier LabQuest Viewer User Manual
Page 9
9
Original LabQuest
1. Tap the Home icon and then select Control Panel▶System Information.
2. Tap the Device tab. The name is displayed in the Device name field.
I can see the LabQuest screen from LabQuest Viewer, but cannot control it.
1. Verify the Allow screen control option is enabled in LabQuest.
LabQuest 2
1. Launch the Connections app from the Home screen.
2. Tap the Viewer gear.
3. In the LabQuest Viewer Settings dialog, select the Allow screen control check box.
Original LabQuest
1. Tap the Home icon.
2. Select Control Panel▶ Viewer Setup.
3. In the LabQuest Viewer Setup dialog, select the Allow screen control check box.
2. Verify you are connected to the correct LabQuest by checking the name and IP address of
the LabQuest. For more information, see
l
How do I determine my LabQuest name?
l
How do I determine my LabQuest IP address?
3. Reconnect to your LabQuest (required if screen control is enabled while you are
connected).
What I am seeing on LabQuest Viewer does not match my LabQuest screen.
Verify you are connected to the correct LabQuest by checking the name and IP address of the
LabQuest. For more information, see
l
How do I determine my LabQuest name?
l