Vernier Spectro Pro - Manual (Page 12)

Spectro Pro 8
•
From the mode buttons in the toolbar select one of the following
experiment files: Absorbance vs. Time, Absorbance vs.
Concentration, or Absorbance vs. Wavelength.
•
Follow the on-screen instructions.
•
Spectro Pro is now ready to collect data.
•
Click on the Collect button on the toolbar. Follow calibration
instructions, as required, and begin data collection. Spectro Pro will
plot data in the graph window. When you have completed data
collection, click on the Stop button. (In the Absorbance vs. Time
mode data collection will stop automatically at the end of the
designated time.)
•
You can adjust most features of the graph by double clicking the
graph and making changes in the resulting dialog box.
•
First, select a portion of the graphed data by dragging across
it.
•
Then click on the linear fit button on the toolbar.
If you need more information about using Spectro Pro, check the on-line
help files.
Select Desired Experimental
Setup
Collect data
Adjust graph
Insert linear regression line
If you need more