Vernier Spectro Pro - Manual (Page 39)

Spectro Pro Reference
Spectro Pro 8
Collect begins a data collection run. Clicking the Collect button in the
toolbar or pressing the Enter key has the same effect.
After data are collected, choose this item to get an instant replay of the
data collection. Select the run you wish to replay from the drop-down
menu. You can set the replay rate to faster than real time, slower, or to
the original rate.
Stop causes data collection or replay to cease.
This is a toggled mode. Choose Live Readouts to turn the mode on (a
checkmark appears next to the menu item); choose it again to turn off.
When the Live Readouts mode is on, the current sensor readings will be
displayed in any meter window. When Live Readouts is disabled, the
meter window reports the sensor value on the graph nearest the cursor
position. The current sensor readings are always displayed in the status
bar.
Collect
Replay
Stop
Live Readouts