Trouble, Troubleshooting, Check this first – Canon DC 410 User Manual

Page 73: Power supply, Recording, Playback

Advertising
background image

Additional Information

• 73

Trouble?

If you have a problem with your camcorder, refer to this section. Sometimes what you
think is a malfunction of the camcorder may have the simplest of solutions - please
read the “CHECK THIS FIRST” box before going on to the more detailed problems
and solutions. Consult your dealer or a Canon Service Center if the problem persists.

CHECK THIS FIRST

Power Source

The camcorder will not turn on or it turns
off by itself.

- The battery pack is exhausted. Replace or

charge the battery pack (

18).

- Remove the battery pack and reattach it

correctly.

Cannot charge the battery pack.

- Charge the battery pack in temperatures

between 0 °C and 40 °C (32 °F and
104 °F).

- The battery pack is too hot. Charging will

start once the battery pack temperature is
below 40 °C (104 °F).

- The battery pack is damaged. Use a

different battery pack.

After using the camcorder for a long time,
it becomes hot.

- This is not a malfunction. Turn off the

camcorder and let it cool down before
resuming use.

Recording

Pressing

will not start recording.

- Use a disc whose performance has been

tested with this camcorder (

7).

- The disc is full (“

END” appears on the

screen). Delete some recordings (DVD-RW
in VR mode) to free some space (

35) or

replace the disc.

- Unfinalize (

49) the disc (DVD-RW in

VIDEO mode).

- The camcorder has exceeded its

operational temperature. Turn off the
camcorder and let it cool down before
resuming use.

The point where

was pressed

does not match the beginning/end of the
recording.

- There is a slight interval between pressing

and the actual start of recording.

This is not a malfunction.

Troubleshooting

Power supply

Is the battery charged? Is the compact power adapter correctly connected to the
camcorder? (

18)

Recording

Did you turn the camcorder on and set and set it to

or

mode?

Is the CAMERA indicator lit up in green? Was the disc or memory card correctly inserted
into the camcorder? (

25, 27)

Playback

Did you turn the camcorder on and set and set it to

or

mode? Is the

PLAY indicator on? Was the disc or memory card correctly inserted into the camcorder?
(

25, 27) Does it contain any recordings?

Start/Stop

Start/Stop

Start/Stop

Advertising