Sangean ATS-909X w (R1) - Manual (Page 20)

9
ATS – Automatic Tuning System
The ATS-909X features an automatic tuning system that will quickly
and automatically set all your memory presets on FM, LW and MW
based upon the signal strength of the incoming stations. Among the
many conveniences offered by this feature it is especially useful for
the traveler who can automatically find all the local stations in any
strange city he/she may travel to with just the press of a button.
To start ATS press and hold for more than 2 seconds the button
designated ATS/FM or ATS/LW or ATS/MW. The memory presets
M through M9 are assigned stations selected automatically by the
ATS system. The ATS system will automatically store 8 presets
on MW, 27 presets on FM and 9 presets on LW. (9 presets on
each page. Once the ATS has set the 9 presets on  page press
the PAGE button to change pages and repeat the ATS procedure
to select the remaining presets). An audible signal indicates the
automatic search has been completed and the presets have been
assigned. ATS is not possible on the SW band.
DIRECT TUNING USING KEY PAD
If you know the frequency of the station you are seeking press
FREQ button and enter the frequency you desire directly using the
numerical key pad. Don’t forget to use the decimal point button if
the frequency you are entering has a decimal point in its frequency.
Press the Enter Selection button to enter the frequency.