Sangean ATS-909X w (R1) - Manual (Page 24)

23
RECALLING A STATION IN MEMORY
On LW, press ATS/LW button, then press any of the numbered
buttons on the key pad.
On MW/FM, press ATS/MW button or press ATS/FM button, select
desired page by pressing PAGE button and then press any of the
numbered button on the key pad.
On SW, press METER/SW button, select desired page by pressing
PAGE button and rotating the Rotary Tuning Knob until desired
page is selected and then press Enter Selection button. The
receiver will then automatically search for the strongest frequency
on that page. You may change the selected frequency using the
numbered keys on the key pad.
CANCELING A STATION IN MEMORY
Recall the station in memory, press the MEMO button and then
press the Cancel button (C button).
To LOCK A STATION INTO MEMORY
After programming your stations into memory you may lock any
station into memory to prevent accidental erasure or elimination
should the ATS feature be turned on again.
To lock a station, recall the station you wish to lock and press
MEMO button and then LOCK button. The display will show memo
locked symbol whenever the station is selected. To remove station
from locked position repeat above procedure and locked symbol
will be removed and a station will no longer in locked state.