BendixKing KMD 150 - Pilots Guide - Manual (Page 145)

Rev 2 Oct/2002 KMD 150 Pilot's Guide
131
APPENDIX 1 - WARNING SCREENS
RAM LOST
WARNING
This screen is displayed
after power-on if any of
the RAM areas are found
to be corrupted. Key 1
causes a RAM clear to be
carried out on the failed
area and the last known
good values to be rein-
stated. If the last known
good values are also sus-
pect, a full RAM clear of
the affected data will be
carried out.
MEMORY BATTERY WARNING
This Screen will appear if
during initialization the
memory battery voltage is
found to be low. It can
also appear at any time
during operation if the
internal battery falls
below a pre-determined
limit.
By pressing Key 1 you
can return to whichever
Screen was showing
before the low voltage
condition was detected. If
this screen is displayed,
you should have your memory battery replaced by your Bendix/King
dealer at the earliest possible opportunity.
Warning Screens
Screen 51: RAM Lost Warning Screen
Screen 52: Memory Battery Warning
Screen