BendixKing KMD 540 - Pilots Guide System KMD 850 - Manual (Page 32)

16
Rev 9 Feb/2009 KMD 550/850 Pilot's Guide
3. Turn the outer knob clock-
wise until the cursor is posi-
tioned as in Figure 15.
4. Turn the inner knob to
sequence through all the air-
port names in the database
beginning with EAGLE, stop-
ping at the desired name as
in Figure 16.
NOTE: This same method
may be used with the name
of the city where the airport is
located.
5. Press the CLEAR Soft
Key to return to the moving
map or press the FIS INFO
Soft Key (if FIS is installed) to
view the FIS TEXT Page for
the selected airport. Then
press the MAP key to return
to the moving map.
NAVAID INFORMATION
As explained previously, you
can access additional Navaid
information by placing the
joystick pointer over a VOR
or NDB icon and pressing
MORE INFO. Full details of
the Navaid are listed, type,
frequency and ident as
shown in Figure 17. The fifth
line in the box is a visual rep-
resentation of the Morse
Code identifier.
GENERAL ICON
INFORMATION
As explained previously, you can display additional information about an
icon by placing the joystick pointer over any data icon that is not an air-
port, VOR or NDB and pressing MORE INFO. All available information
concerning the chosen data item is then listed.
Operation
Figure 16
Figure 17
Figure 15