System setup – BendixKing KMD 540 - Pilots Guide System KMD 850 User Manual

Page 37

Advertising
background image

KMD 550/850 Pilot's Guide

21

SYSTEM SETUP

This section of the manual is designed to provide step by step instruc-
tions for the setup of the KMD 550/850. Note that not all features dis-
cussed in this section are available in all installations.

INTRODUCTION

The KMD 550/850 unit is operated via a joystick, a series of five Power
Keys located along the right side of the unit, a series of Function Select
Keys located along the bottom, and an inner and outer Control Knob.
The joystick allows movement of the pointer in MAP mode and is used to
select and change setup fields. The appropriate key labels for a partic-
ular page are configured in software and displayed alongside the appro-
priate key. The rotary brightness control is used for adjusting the bright-
ness of the display.

MAP SETUP

Press the AUX Function Key
to display Figure 21. Press
the MAP SETUP Key to dis-
play Figure 22. Use the joy-
stick to select and change
the desired fields.

NOTE: If a configuration
password is requested, map
setup may not be allowed.

ORIENTATION: Set either
in Track Up or North Up.

AIRPORT NAME: Labels
airports in MAP MODE either
with ICAO code, airport or
city names.

COORD SYSTEM: Deter-
mines whether the unit oper-
ates with reference to
Lat/Long, UTM or OSGB.

Note: OSGB is only defined
for Great Britain.

Rev 9 Feb/2009

System Setup

Figure 21

Figure 22

Advertising
This manual is related to the following products: