BendixKing KMD 540 - Pilots Guide System KMD 850 - Manual (Page 44)

28
KMD 550/850 Pilot's Guide Rev 9 Feb/2009
CHANGING THE DATA CARD
To change the data card follow these simple steps:
1. Turn off the KMD 550/850.
2. Grasp the data card and pull it straight out of its socket.
3. With the card facing upward, as indicated on it’s label, insert the new
data card being careful to align the card with the socket then press the
new card firmly into place.
4. Turn the unit on and check for correct operation. If the new data card
contains a newer version of operating software the unit will update the
operating system to this newer version. Status bars will be displayed
during the update process.
DATABASE INFORMATION
Due to Honeywell’s policy of continual development and routine data-
base updates, new data cards will become available every 28 days. As
a registered owner of a KMD 550/850, you will be offered a 1/3/6/12
monthly data card subscription.
DATABASE CYCLE INFORMATION
Keeping the database current in the KMD 550/850 is the user’s responsi-
bility. Honeywell maintains its databases to be current at all times to the
latest Jeppesen 28-day data cycle.
For data card subscriptions and FIS subscribers, contact Wingman
Services at the following numbers:
1-800-247-0230 if calling within the United States or Canada
(913) 712-3145 if calling from outside the United States or Canada
(913) 712-3904 FAX
e-mail: [email protected]
Visit Wingman Services at www.bendixking.com
For information about software revisions and the most current pilot’s
guide and addendums, visit www.bendixking.com/kmd.
Data Cards