CANOGA PERKINS 1502 Domain Management Module - Manual (Page 31)

EdgeAccess Universal Chassis System
Manage the Module Code Library
The Module Code Library, located in the Flash Memory so that the information remains available
after power-down and power-up, can store one version of code for each module in the domain.
You may need to view or delete the Library Code files (the firmware, configuration [*.cfg], and
capabilities [*.cap] files for various modules and the DMM). To access the Code Library menu,
follow these steps:
1. From the DMM Main Menu, type 6 , or "Access Module Code Library," and press <Enter>.
The Code Library menu appears.
2. At the Code Library menu, select an option:
• To view files in the current working directory, type
1 .
• To change to another working directory, type
2 . At the prompt, enter the path to the new
directory or enter "//" to go to the top of the directory tree.
• To remove files, type
3 , and follow the prompt on screen.
• To remove a directory, type
4 , and follow the prompt on screen.
3. To return to the Main Menu, press <Esc>.
Manage Logged In Users
At times, you may need to monitor which users are currently logged in to the system through the
DMM and, if needed, you can force a specific session off (requires supervisor access). The
Connected Sessions screen shows information about the current users by session number; an
asterisk (*) next to the session number indicates your session. To access the Connected Sessions
screen, follow these steps:
1. From the Main Menu, type 9 , "Manage Logged In Users," and press <Enter>. The
Connected Sessions screen appears.
2. To force a session off, type the number for that session and press <Enter>.
Note: Although a user with any level of access can view the information, a user must have
supervisor access to force a session off.
3. To return to the Main Menu, press <Esc>.
Model 1502 Domain Management Module 3-21