CANOGA PERKINS L322 Fast Ethernet Media Converter - Manual (Page 19)

EdgeAccess Universal Chassis System
L322 Fast Ethernet Media Converters 4-1
Chapter 4
Management - VT-100
If the system includes a DMM and a CIM, you can manage the system through VT100 Terminal
Emulation, which is accessible by a Telnet session, HyperTerminal
TM or similar terminal emulation
software, a standard SNMP network manager, and CanogaView.
4.1 VT100 Terminal Emulation
Connect the VT100 terminal emulation sessions through the DMM used in the UCS 1000 or 1002
chassis. You cannot manage a CLIM in a UCS 1001 or Model 1030 Standalone enclosure.
For details on the DMM, see the Model 1500 Domain Management Module Users Manual (for UCS
1000) or Model 1502 Domain Management Module Users Manual (for UCS 1002).
Setting up the VT100 session depends on which connection, serial port or Ethernet, you have
available for access to the VT100 management program. Canoga Perkins suggests that you use
HyperTerminal for your first session. You must set up TCP/IP for the DMM before you can use
Telnet; for details, see the manual for the DMM.
4.2 PC Configuration for Terminal Operation
These steps briefly describe how to set up your PC for a terminal connection. For details on using
Windows, see your Windows documentation.
Step 1. Turn on your PC.
Step 2. When the main Windows screen (desktop) appears, click Start, highlight Programs,
Accessories, the HyperTerminal Folder, and click HyperTerminal.
Step 3. At the Connection Description dialog, select an icon and enter a name for the connection to
the system and click OK. See Figure 6.