Check port and link status – CANOGA PERKINS 9145 Network Interface Device User Manual
Page 63
![background image](/manuals/651379/63/background.png)
9145 Network Interface Device
3-45
3. At the Functional Configuration Menu, type the number for an item and press <Enter>.
Pressing <Space> cycles through the options. Press <Tab> to highlight the select Local or
Remote columns. Press <Enter> to select an option.
1. User Port Setting
Sets data rate and duplex option on the User Port. After typing [
1
] <Enter>, pressing
<Space> cycles through the Data Speed and Duplex options. Options are Interface
Module dependant.
2. Ext Port Setting
Sets data rate and duplex option on the User Port. After typing [
1
] <Enter>, pressing
<Space> cycles through the Data Speed and Duplex options. Options are Interface
Module dependant.
3. RMTF
Enables or Disables Remote Fault Forwarding (RMTF) when SBMC is enabled.
Enables or Disables Remote Fault Forwarding and Link Loss Echo (RMTF/LLE)
when SBMC disabled. Pressing <Space> cycles through the options. Options are
Disabled, Ext Port Enabled.
4. Link Loss Fwd
Enables or Disables Link Loss Forwarding (LLF). Pressing <Space> cycles through
the options. Options are Disabled, User – Ext, Ext – User, and Both Directions.
5. Flow Control
Enables or Disables flow control on the Remote port. Pressing <Space> cycles
through the options. Options are Disabled, Ext Port Enabled.
6. Maximum Frame Size: Sets maximum allowable Ethernet Frame size the 9145 will
forward. Size range is 1518-10000.
7. Sideband Management
Enables or disables SideBand Management Channel (SMBC) communications with
a remote 9145, L351 or L357. When enabled, pressing <ctrl> L verifications SMBC
connectivity with the remote unit.
8. Remote Configuration
Displays Functional Configuration of SBMC connected remote 9145, L351 or L357.
4. To return to the Main Menu, press <Esc>.
Check Port and Link Status
The Port Information screen shows the current conditions for the 9145 ports. The Link Status
screen shows current conditions for the link, including SFP power. To access port and link
status, follow these steps:
1. From the Main Menu type [
3
], "Port Information," and press <Enter>. The Port Information
screen appears.