CANOGA PERKINS 9145 Network Interface Device - Manual (Page 49)

9145 Network Interface Device 3-31
Setting General Security Parameters
General security parameters include passwords characteristics, unsuccessful long-in attempt
lockout, and inactivity timer. To set general security parameters, access the Security
Configuration Menu and follow these steps:
1. At the Main Menu, type [ 1 ], "System Configuration," and press <Enter>.
2. From the System Configuration Menu, type [ 3 ], "Security Configuration," and press
<Enter>.
3. At the Security Configuration Menu, type the number for the item you wish to configure
and press <Enter>. Type the applicable information or press <Space> to cycle through
the options for that item. Press <Enter> to select the option or to enter the information
you typed.
Password Configuration
1. Minimum Length
Minimum length in characters of a valid password. 0 – 15 Characters
2. Minimum Alpha Characters
Minimum number of Alpha (a-z) characters required in a valid password. 0 – 15
Characters, 0 disables restriction.
3. Minimum Numeric Characters
Minimum number of Numeric (0-9) characters required in a valid password. 0 –
15 Characters, 0 disables restriction.
4. Minimum Punctuation Characters
Minimum number of Punctuation characters required in a valid password. 0 – 15
Characters, 0 disables restriction.
5. Maximum Consecutive Character Types
Maximum number consecutive characters of the same character type (Alpha,
Numeric, Punctuation) allowed in a valid password. 0 – 15 Characters, 0
disables restriction.
Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 11:45:59
----------------------------SECURITY CONFIGURATION------------------------------
PASSWORD CONFIGURATION
1. Minimum Length : 0
2. Minimum Alpha Characters : 0
3. Minimum Numeric Characters : 0
4. Minimum Punctuation Characters : 0
5. Maximum Consecutive Character Types : 0
6. Maximum Same Character : 0
7. Allow username in password : Enabled
8. Password Expiration Time : 0
9. Password Reuse Count : 0
LOCKOUT/LOGOUT CONFIGURATION
10. Lockout After Failed Attempts : 0
11. Lockout Type : Hard
Lockout time : 0
12. Display Lockout Message : Disabled
13. Lockout Message : Account has been locked out
14. Lockout Craft Port : Disabled
15. Inactivity Logout time (mins) : 0
Select [1-15]:
------------------------------------Messages------------------------------------