Chapter 5 - specifications, 9145 specifications, Regulatory compliance – CANOGA PERKINS 9145 Network Interface Device User Manual
Page 85: Eia rs-232 port, Chapter 5 specifications
9145 Network Interface Device
5-1
Chapter 5
Specifications
9145 Specifications
Standards: IEEE
802.3
Dimensions:
1.72" H x 12" W x 11.75" D (44 x 341 x 298 mm)
Weight:
5.5 lb (2.5 Kg)
Operating Temperature:
0° to 50° C
Operating Humidity:
Up to 90% (non-condensing)
Power:
100 VAC to 240 VAC (auto-ranging), ~0.15 A, 50 to 60 Hz
-36 VDC to -72 VDC, 0.6A
Regulatory Compliance
• ETL, cETL & LVD (UL 60950 CAN/CSA C22.2 No. 60950, EN/IEC 60950)
• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)
• CE
Mark
• FCC Part 15B Class A (U.S.)/ICES-003 (CAN)
• VCCI Class A (Japan)
• C-Tick (AS/NZS 3548 - Australia)
• CDRH CFR21/IEC 60825-1 (Laser Safety)
• NEBS Level 3 Certified & Tested
EIA RS-232 Port
The RS-232 presents a DCE Interface for terminal support.
Table 4 – EIA-232 Pinout
Pin
Number
Signal
Name
I/O
1
DCD
Output – Held High
2 RXD
Output
3 TXD
Input
4 DTR
No
Connection
5 Signal
GND
6
DSR
Output – Held High
7 CTS
Input
8 RTS
Output
9
RI
Not Used, connected to GND