Leica Geosystems Leica DISTO D8 - Manual (Page 14)

EN
F
E
P
11 Leica DISTO™ D8 LCA782206a en Functions
Addition / subtraction
Distance measuring.
The next measurement is added to the previous one.
The next measurement is subtracted from the previous one.
This process can be repeated as required.
Press this button and the result is then always shown in the summary
line with the previous value in the second line.
The last step is cancelled.
Area
Press once. The symbol appears in the display.
Press this button to take the first length measurement (e.g.
length).
Press it again to take the second length measurement (e.g. width).
The result is shown in the summary row.
Press and hold the
key to display the perimeter .
Volume
Press this button twice. The symbol appears in the display.
Press this button to take the first length measurement (e.g.
length).
Press this button to take the second length measurement (e.g.
width).
Press this button to take the third length measurement (e.g.
height).
The result is shown in the summary row.
Press and hold the button to display additional room information
such as ceiling/floor area , surface area of the walls , circumfe-
rence .
Trapezoid measurement 1
See drawing {J}
Press the key once. The symbol is displayed.
Press the key and take the first length measurement
(e.g. height 1).
Press the key again and take the second length measurement
(e.g. width)
Press the key and take the third length measurement
(e.g. height 2).
The result is shown in the summary row.
Press and hold the key to display additional information about the
trapezium measurement, for example inclination angle , trapezium
area .
(in the same quadrants)
Double
tilt measurement 2
Triangular area measu-
rement
Staking out function
Profile measurement
Measuring program Icon Measurement
1 - 2 - 3
Detail display
1 - 2 - 3