Start-up, Inserting/replacing batteries, Keypad – Leica Geosystems Leica DISTO D8 User Manual
Page 8
EN
F
E
P
5
Leica DISTO™ D8 LCA782206a en
Start-up
Start-up
Inserting/replacing batteries
See figure {A}
1
Remove battery compartment lid and attach handstrap.
2
Insert batteries, observing correct polarity.
3
Close the battery compartment again. Replace the batteries when the
symbol
flashes permanently in the display.
)
Remove the batteries before any long period of non-use
to avoid the danger of corrosion.
)
We recommend the usage of AA size max. 1,5V lithium batteries
or rechargable NiMH batteries. The Leica DISTO™ also works
with Alkaline batteries but the battery lifetime will be reduced.
ƽ
WARNING:
This Leica DISTO™ was delivered with high quality non-rechargable
lithium batteries. Wrong usage of lithium batteries can be hazardous.
Precautions:
•
Please do not recharge these batteries.
•
Do not mix lithium batteries with other types of batteries.
•
Do not use batteries if their casing is damaged.
Changing the reference point (multifunctional
endpiece)
See figure {B}
The instrument can be adapted for the following measuring situations:
•
For measurements from an edge, fold out the positioning bracket until
it first locks in place. See figure {C}.
•
For measurements from a corner, open the positioning bracket until
it locks in place, then push the positioning bracket lightly to the right
to fold it out fully. See figure {D}.
A built-in sensor automatically detects the orientation of the positioning
bracket and adjusts the zero point of the instrument accordingly.
Keypad
See figure {E}:
1
ON / DIST (On/measuring) button
2
Digital pointfinder - button
3
Timer button
4
Plus (+) button
5
Minus (-) button
6
Area / volume button
7
Indirect measurement (Pythagoras) button
8
Trapezoid button
9
Functions button
10 Reference button
11 Storage/Memory button
12 Clear/Off button
13 Menu/Equal button
14 Bluetooth button
15 Second function button
16 Indirect measurement with tilt sensor button