Leica Geosystems TPS110C - Manual (Page 20)

Operating concept, Keyboard 20
User Entries
User entry fields are
characterized by the focus.
• Input fields: Enter/Edit data
(e.g. reflector height)
• Choice fields: Selection out of
a predefined choice list (e.g.
units). A double arrow
indicates a choice field.
Character set
The vertical character bar
contains the following
characters:
" + "
(ASCII 43)
" - " (ASCII 45)
" 0 - 9 " (ASCII 48 - 57)
Input fields
Example: Inputs display
( + )
Opens the Inputs display
1. Position focus on
desired input field.
2. Start Edit mode: The
vertical character bar is
positioned left justified.
3. Select the desired
character.
4. Confirm selected
character: The vertical
character bar moves to
right.
5. Repeat steps 3 and 4
if necessary.
[OK] 6. Confirm input: The
vertical character bar is
being closed, the focus
positions on the next input
field.
[OK] 7. Leaves the display.
INPUTS
Reflector height
hr : .500 m
Instrument height
hi : 1.500 m
[OK]
+
-
0
1
2
3
4
5