Leica Geosystems TPS110C - Manual (Page 38)

Measuring 38
Set Hz-angle to 0°00'00"
1. Aim on orientation
point.
2. The following
confirmation
message is shown:
Set Hz = 0 ?
[YES] [NO]
Angle measurement
[YES] 3a: Set Hz-angle to
0. Back to
measuring mode
automatically.
[NO] 3b: Back to
measuring mode
automatically without
change.
Set Hz-angle
Set any Hz-angle
1. Turn telescope to
the desired Hz-
angle.
2. Hold indicated Hz-
angle. The Hz-angle
in the display starts
flashing.
3. Aim on orientation
point.
4.
5. Set Hz-angle. The
Hz-angle stops
flashing.
Set Hz-angle direction
Switch between "Right
angle measurement" (=
clockwise) and "Left angle
measurement" (=
anticlockwise).
Indicates that Hz is set to
"left angle measurement"
(anticlockwise).
ANGLE & DISTANCE 1/3
Hz : 23°26'08"
V : 61°02'57"