Magliner COOLIFT - Manual (Page 22)

1-800-MAGLINE (624-5463) Page 22 www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings
Pass or Fail
Timing
Notes
General Inspection
W
arning
and branding
labels
are in good condition
Visual inspection
•
Labels are in place and not coming loose
•
Labels are in good condition
•
Red stripes are in place and in good condition
W
eekly
Frame
Frame is in good condition •
No damage
•
No excessive wear
Visual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings are expected
W
eekly
Frame
Containment strap plate
Visual inspection
•
Plate should be flat and free of damage or excessive wear
•
Plating should not be cracked or damaged
•
Mounting screw should be tight
W
eekly
Deck
Deck is in good condition •
No damage
•
No excessive wear
Visual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings
W
eekly
Deck
Yoke screws are not loose in deck
Manual inspection
Screws are tight
W
eekly
Brake System
No system leaks •
Fittings on master cylinder
,
connecting block & calipers
•
Master cylinder body
•
Caliper body
•
Hoses
Wipe around fittings and master cylinder with dry rag
No leaks (rag remains dry)
W
eekly
Brake System
Brake lever in good condi
-
tion and operating properly
Visual inspection Operate brake
•
No visible damage
•
Smooth operation
W
eekly
Brake System
Holding brake pawl in good condition and operating properly
Visual inspection Set brake
•
No visible damage
•
Brake locks in place
W
eekly
Brake System
Mounting screws tight •
Master cylinder mount to handle
•
Master cylinder cap
•
Connecting block to base of enclosure
•
Caliper mounting
Manual inspection
•
Parts are tight to mounting surfaces
W
eekly