Magliner COOLIFT - Manual (Page 26)

1-800-MAGLINE (624-5463) Page 26 www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings Pass or
Fail
Timing
Notes
W
elds
Front caster plate
Visual inspection
No cracks or damage
Monthly
W
elds
Base plate
Visual inspection
No cracks or damage
Monthly
W
elds
Enclosure
Visual inspection
No cracks or damage
Monthly
W
elds
Handle cross bar
Visual inspection
No cracks or damage
Monthly
W
elds
Battery Box
Visual inspection
No cracks or damage
Monthly
W
elds
Vertical slide rod
Visual inspection
•
Rod is straight with no signs of wear
•
Rod plating is not cracked or dam
-
aged
Quarterly
Operator Interface
Guide blocks
•
Visual inspection
•
Cycle deck up and down several times
Blocks are not damaged or worn and move freely in the vertical slide
Quarterly
Operator Interface
Gas spring mounting •
Mounting studs
•
Rod and body connectors
•
Preload screws are tight
Manual / V
isual
inspection
•
Components are tight and connectors engaged fully with studs
Quarterly
Electrical
Wiring •
Wire connections
•
Wire crimps and solder joints
Manual inspection
No loose connections, crimps or solder joints
Quarterly
Electrical
Battery box
Manual / V
isual
inspection
•
Battery box case and cover are free of damage, dents and cracked welds
•
No loose components
•
Cover for charger port is intact
•
Connecting screws to the battery terminals are tight
•
Battery box cover screws are tight
Quarterly
Electrical
Operation
Cycle deck up and down several times
•
Deck should move through entire range of motion without tripping circuit breaker
•
Buttons should not stick in down position
Quarterly