Magliner COOLIFT - Manual (Page 23)

1-800-MAGLINE (624-5463) Page 23 www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings
Pass or Fail
Timing
Notes
Hydraulics
Cylinders not leaking (note especially front cylinder)
Visual inspection
Thin film of oil on piston rod
W
eekly
Hydraulics
Cylinder condition •
No rod scoring
•
Return springs fully functional
Visual inspection
Cylinder rod is smooth and retracts fully into cylinder body
W
eekly
Suspension
Wheels and tires are in good condition
Visual inspection
Wheels and tires are free of damage
W
eekly
Suspension
Components are straight and undamaged •
Front wheel mounting yoke
•
Main axle
•
Rear swivel caster frames
Manual inspection
•
Components are not damaged and operate freely
•
Main axle plating is not cracked or damaged
W
eekly
Operator Interface
External mounting screws are tight •
Base plate mounting to frame
•
Enclosure mounting or base plate
•
Handle mounting screws
•
Switch plate mounting screws
Manual inspection
Components are tight to mounting surfaces
W
eekly
Operator Interface
Handle, enclosure and door are free of damage and in good condition
Visual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings are expected
W
eekly
Operator Interface
Handle grips
Visual inspection
Grips are not worn or damaged
W
eekly
Operator Interface
Containment strap
•
Belt should be free of tears and abra
sions
•
Plating on buckle should not be cracked or damaged
•
Mounting screws should be tight
•
Mounting tab should not be bent or dam
-
aged
•
Belt should retract into housing such that only the buckle protrudes
•
Housing should not be cracked or damaged
•
Strap tongue should rotate freely
W
eekly