Set “ m. tv” or “ jsl vcr 2” position, Begin recording on the tape deck, Begin the source to be recorded – Panasonic SA-AX6 User Manual
Page 33: Set tv”or“^ vcr 2” position, Begin recording on the vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a recording
INPUT SELECTOR
When you select DVD 6CH INPUT mode, only sound from the front
left and right speakers is recorded.
To record all 6 channels
Set the playback mode on your DVD player or decoder to 2 channel
(stereo) mode.
For details, see the instruction manual that came with the connect
ed equipment.
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.).
See-the tape deck’s operating instructions for details.
Turn INPUT SELECTOR to select the source
to be recorded.
Any source can be selected except TAPE.
(only if you select TV/VCR 2 in the above step)
Set “ M. TV” or “ jsL VCR 2” position.
Begin recording on the tape deck.
Follow your tape deck's operating instructions.
Begin the source to be recorded.
Follow your equipment’s operating instructions.
I
I
s
O
o I
d
(DO
o
o
o o o o o o o
o o o o o o o o
VCR 2
INPUT SELECTOR
You can record only on VCR 1.
Before recording, prepare the VCR 1 (VCR) for recording (recording
level adjustment, input selector setting, etc,).
See the VCR’s operating instructions for details.
Turn INPUT SELECTOR to select the source
to be recorded.
Any source can be selected except VCR 1 (VCR) and TAPE.
Recording from the tape deck is not possible.
(only if you select TVA/CR 2 in the above step)
Set T V ” o r “ ^ VCR 2” position.
Begin recording on the VCR.
Follow your VCR’s operating instructions.
Begin the source to be recorded.
Follow your equipment’s operating instructions.
For your reference
There are VCR 2 terminals at the front of this unit.
It is easier to carry out dubbing from a camcorder if it is connected
to the front terminals.