Panasonic KX-TC1891B - Manual (Page 30)

^ Preparing the Answering System
Selecting the Caller’s Recording Time
You can select "1 minute", "3 minutes" or "Greeting
recording time Your phone comes from the factory
only" for the caller's
set to "3 minutes"
1
Press [FUNCTION/EXIT/CH
Press (3 or Q repeatedly until the arrow
points to "Program"
Press FWD/EDIT® (Yes key)
Press (3 or El repeatedly until the arrow
points to " tad program"
Press FWD/EDIT (El (Yes key)
■ The base unit display shows the answering
syslem function menu
Press
►save directory
Ringer volume
▼A ►=Yes
►Program
TA ^=¥05
►Save DIRECT#
Set flash time
TA ►=Yes
Talk switching
► tad program
TA ►=Yes
Answering
system setting
See base unit
Base unit display
8
Base unit display
Recording time
Linei 3min
To select LINE 1, press (T]
To select LINE 2, press
■ The current setting of the selected line is
displayed on the base unit
Press
(T|,
or (^ to select the recording
time
1 1 minute
2 3 minutes (factory preset)
3 Greeting only
I Press FWD/EDIT ® (Save key)
■ A beep sounds
■ To program the other line, start again from step 4
■ To return to the standby mode, press (FUNCTION/EXIT/CH]
If you select "Greeting only", the unit will answer a call with the
greeting message, and then hang up The unit will not record any
incoming messages
30