Summary of remote operation, Remote operation with the handset, Press – Panasonic KX-TC1891B User Manual
Page 81: Press (#] ® to select “line 1 and line 2, Remote operation” is
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Operation with the Handset
You can operate your answering system
with the handset
The announcements and recorded
messages can only be heard with the
handset
Summary of remote operation
[FLASH/CALL WAIT/PLAYBACK]
Press
(FLASH/CALL WAIT/PLAYBACK]
•The unit announces the line{s) for which the answering system is on and
the number of new messages on the line(s)
•“Remote operation” IS
displayed on the handset
1 Select the desired line(s) To use the Itne(s) for which the
answering system is already on, go to step 2
Press (#] O to select “LINE 1"
Press (5] @ to select “LINE
2”
Press (#] ® to select “LINE 1 and LINE 2”
•The number of new messages on the selected line(s) is heard
2 Enter the desired direct commands (p 82, 83)
•If you want to operate another line, repeat from step 1
•If you do not enter a command, the voice menu will start (see next page)
•After the voice menu, all message playback on the selected tine(s) will
start
To end remote operation, press
[FLASH/CALL WAIT/PLAYBACI^
•The messages are saved
•The
line(s)
that
can
be
answered
by
the
answering
system
will
not
change
even
if
you
select
another
line
in
step
1
To
turn
on
the
answering
system
for another line, see page 83
•The unit will announce the remaining recording time after playback, if it is less
than 5 minutes
• If two tones sound during the remote operation, an incoming call has been
received To answer with the handset, press the line button whose status icon is
flashing quickly The remote operation is ended
• If you hear
“Memory
tuU" after playback, erase some, or all, of the messages
(P 82)
81