Panasonic KX-TC1891B - Manual (Page 40)

Using the Caller List
Viewing the Caller List
To check who has called, follow the steps below
Make sure the unit is in the standby mode
With the handset
1
Lift the handset off the base
unit and press (5
enter the Caller List
■ The display will show, for
example, the fallowing
2 new calls
TA ►=Directory
■ You can go [□ the directory list
by pressing FWD/EDIT [►]
(P 53)
To search from the most
recent call, press
To search from the oldest
call, press [*]
■ To scroll between callers,
press or [5
JACK SMITH
1 - 2 2 2 - 3 3 3 - 4 4 4 4
3 IDP JUN 10
To exit the list, press
(FUNCTION/EXIT/CH)
■ The handset will return to the
standby mode
With the base unit
1
Press [CALLER ID] to enter
the Caller List
■ The display will show, for
example, the following
2 new calls
«=Dld »^New
To search from the most
recent call, press [SKIP/FF[
To search from the oldest
call, press [REPEAT/REW]
■ To scroll between callers,
press [SKIP/FF] or
f REPEAT/REW]
JACK SMITH
1-222-333-4444
3 IQP JUN 10
To exit the list, press
[STOP/EXIT]
■ The base unit will return to the
standby mode
'Once new calls have been checked, "V" will be added
'If “No Items stored" IS displayed in step 1, the Caller List is empty After
5 seconds, the unit will return to the standby mode
'If more than one call is received from the same caller, the date and time of the
most recent call will be recorded If the same caller calls again, the call entry
with "V" will be deleted
40