Panasonic KX-TC1891B - Manual (Page 75)

Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any
2-digit number (00-99).
The factory preset remote code is “11". If you do not program your own
remote code, you can use “11”.
Make sure the unit is in the standby mode.
1
7
8
Press
fFUNCTION/EXir/^.
Press @ or ® repeatedly until the arrow
points to “Program”.
Press
FWD/EDIT
®
(Yes
key).
Press Q or (3 repeatedly until the arrow
points to
“ tad program”.
Press
FWD/EDIT
B
(Yes
key).
•The base unit display shows the function menu
for the answering system.
Press (T)-
•The current setting is displayed on the base
unit.
Enter a remote code using a 2-digit
number (00-99).
Press
FWD/EDIT
B (Save key).
•A beep sounds. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
•To return to the standby mode, press [FUNCTION/EXIT/CHl.
Ringer volume
►Program
TA ►-Yes
►Save DIRECT#
Set flash time
TA ►=Yes
Talk switching
► tad program
TA ►=Yes
Answering
system setting.
See base unit.
Base unit display
• If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
•The current remote code is displayed on the base unit. When finished, press
f f un c t i o n T e x i t / c h j.
75