Ujsing ifiner, Using the play/record timer, Press [clociotimer – Panasonic SC-AK52 EN User Manual
Page 27: Press [clocktrimer, Press [0play/0rec] to display the tim^ indicator, Press [0/1] to turn the unit off, To change the settings (when unit is on), Ujsing, Ifiner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ujsing
Ifiner
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
TTie play timer cannot be used in combination with the record timer.
Preparations
• Turn the unit on and set the clock (-♦■ page 11),
• For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
• For the record timer, check the cassette’s erasure prevention tabs
page 20: |0), insert the tape in deck 2, select the reverse mode
(For SC-AK52, SC-AK44 and SC-AK22: Russia and Ukraina only)
page 22) and tune to frie radio station page 12) or select
the aux source (-*■ page 29).
jn Press [CLOCK/TIMER] to select the timer function.
"" Every time you press the button:
CLOCK-- ©PLAY — ©REC
^— Previous display
©PLAY : to set the play timer
©REC : to set the record timer
Setting the start and finish times
(T) (Within 8 seconds or so)
Press [TUNEH'IME ADJ (V) or (A)] to select the
starting time.
® Press [CLOCIOTIMER].
© Press [TUNBTIME ADJ (V) or (A)] to select the
finishing time.
© Press [CLOCKTriMER].
The start and finish times are now set.
Turning the timer on
Press [0PLAY/0REC] to display the tim^ indicator.
Every time you press the button:
©PLAY — ©REC
t—(OFF) —I
©PLAY : to turn the play timer on
©REC : to turn the record timer on
(The indicator doesn’t appear if the start and finish times or the
clock haven’t been set.)
Press [0/1] to turn the unit off.
The unit must be off for the timers to operate.
• For play timer
The timer play will start at tiie preset time with volume
increasing gradually up to Üie volume level you preset.
• For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [©PLAY/OREC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
• To change the play/record times
Do steps D,
B.B
and Q.
• To change the source or volume
1. Press [©PLAY/®REC] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Do steps Q to Q.