Panasonic WV-CPR650 User Manual
Operating instructions, Panasonic
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- WV-CPR650/WV-CPR654
- CAUTION
- CONTENTS
- iREClUflÒNS!
- 1. Do not attempt to disassemble the camera.
- 2. Handle the camera with care.
- 5. Clean the CCD faceplate with care.
- 6. Never face the camera towards the sun.
- 3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
- 4. Do not use strong or abrasive detergents when cleaning the camera body.
- CD Auto Iris Lens Connector
- (D Flange-back Adjusting Ring
- CD Lens (Option)
- (4) Camera Mounting Screw Hole
- (D Down Button ((^)
- CD Right Button ([^)
- Q) Left Button (
- (D Up Button ((2))
- CD Set Button ( □])
- ® Power indicator
- ® Gen-lock Input Connector (GEN-LOCK)
- ® Video Output Connector (VIDEO OUT)
- ® Power Cord Socket
- © RS485 Terminals (RS485, A/B/GND)
- © AC/DC Compatible Input Terminal (DC12VIN/AC 24V IN)
- 1. 12 V DC Power Supply
- 2. 24 V AC Power Supply
- RS 485 Connection
- Note:
- ■SYSiiM'CONNECidN
- FOCUS OR FLANGE-BACK
- INSiTALL/ATION OF CAMERA
- • All Reset Operation
- To edit the CAMERA ID
- To erase all characters in the editing area
- To determine the display position of the CAMERA ID
- Notes:
- To return to the CAM SET UP menu
- 2-1. ALC Mode with SUPER-D ON
- 2-2. ALC Mode with SUPER-D OFF and ELC Mode
- Important Notice:
- 6-2. VS Gen-lock Mode (EXT(VS))
- 6-3. Line-lock Sync Mode (LL)
- 7>1. Auto-Tracing White Balance Mode (ATW)
- Automatic White Baiance Controi Mode (AWC)
- Fine Adjustment for AWC (ATW) Manually
- Notes:
- 10-1. Camera Picture Upside Down Positioning (UP SIDE DOWN)
- 10-3. Aperture Gain Setting (AP GAIN)
- 10-4. Pedestal Level.Setting (PEDESTAL)
- 10-5. Chroma Phase (Hue) Setting (HUE)
- To reset to the factory settings
- To close the SPECIAL menu and return to the CAM
- To close the SPECIAL menu and return to the
- SRECIHICATIONS
- STANDARD ACCESSORIES
- OPTIONAL ACCESSORIES