Installation of camera, Mounting from the bottom, Prevention of blooming and smear – Panasonic WV-BP120 User Manual
Page 18: Lens maintenance and cleaning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION OF CAMERA
• Mounting from the bottom
This camera is originally designed to be mounted
from the bottom as shown. The hole is the stan
dard photographic pan-head screw size (1/4‘ -
20
) .
• Mounting from the top
Remove the mount adaptor from the bottom of the
camera by removing two fixing screws. Attach the
mount adaptor to the top as shown in the diagram,
then mount the camera on the mounting bracket.
Make sure that two original screws are used
when mounting the mount adaptor; longer type
screws may damage inner components.
PREVENTION OF BLOOMING
AND SMEAR
When the camera is faced toward spot light or other
bright lights and light reflecting objects, smear or
blooming may appear. Therefore, the camera should
be operated carefully in the vicinity of extremely bright
objects to avoid smear or blooming,
'Smear
Bright object
LENS MAINTENANCE AND
CLEANING
3.
Remove the lens connector
Remove the lens, and inspect the camera CCD
faceplate through the lens mount opening to
assure that the faceplate is free of smudges or
particles of dirt.
Clean the CCD faceplate, if necessary, using lens
tissue or a cotton tipped applicator and ethanol.
Install the new lens.
16-