C> settings, Recharge – Panasonic DATA LINK KX-TCL100-B User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C> Settings

If you purchased an optional AC adaptor for the remote unit, the
remote unit must first be placed on the base unit for a few seconds to

obtain a security code.

Then lift the remote unit and insert the optional AC adaptor.

Recharge

When the ВАТТ LOW/CHARGE
indicator flashes or the unit beeps

intermittently, recharge the battery.

12

o|f all indicators flash when the POWER switch is ON, place the remote

unit on the base unit for a few seconds to update the security code.

o|f the remote unit is connected to the optional AC adaptor (p. 18):

—The ВАТТ LOW/CHARGE indicator remains solid red.
—When the remote unit is placed on the base unit, the CHARGE

indicator will not light.

—When the unit is not communicating, the battery is charged by the

optional AC adaptor. The remote unit does not need to be placed on
the base unit to charge.

Advertising