Panasonic KX-E3000 - Manual (Page 20)

Two different margin formats (margins, tabs and hot zones) may be stored in the memory of the typewriter for
repetitive use. You may name these formats Y or Z.
In Exercise 1 you have set up a margin format. Now you are going to store this format in memory.
Move the MODE selector to STOR
Depress CODE^-Y
In the future, this margin format may be recalled at any time by depressing CODE+ Y with the MODE selector
on NORMAL or AUTO.
Move the MODE selector to NORMAL or AUTO
Clear the existing format from the typewriter by depressing CODE+TAB CLEAR. Now, set up this ne.xt format and
store it under format Z.
Set the left margin at 11
Set the first TAB at 20
Set the second TAB at 33
Set the third TAB at 45
Set the fourth TAB at 54
Set the right margin at 64.
Depress RETURN
Move the MODE selector to STOR
Depress CODE+Z
This format is now stored in memory.
Move the MODE selector to NORMAL or AUTO
NOTE: The typewriter will beep 3 times if you attempt to type or set a new format while in STOR.
STORING MARGIN FORMATS IN MEMORY
14