Panasonic KX-E3000 - Manual (Page 9)

CHANGING THE CORRECTION TAPE
To replace (he correction tape, lift out the typing ribbon cartridge and
remove the two spools of lift-off tape. Place the loaded spool of new tape
on the left pin (B) so that the tape unwinds in a counter-clockwise
direction. Place the tape around the left ribbon guide (C) and behind both
tape guides (A). Pull the tape around the right ribbon guide (D) and place
the empty spool on the right pin (E).
Manually turn the right-hand spool counter-clockwise, tightening the tape
until resistance is felt.
Replace the typing ribbon cartridge.
CHANGING THE DAISYWHEEL
To remove the daisywheel, pull the green lever (F), to the right of the
printer, towards you. Grasp the clear plastic cartridge and lift the
daisywheel out of the machine.
To insert the daisywheel, place the plastic cartridge in the carrier with the
characters facing the platen. Push the green lever back into position.